End Stop Swaged 865
I-SYS® stainless steel end stop swaged is the simpliest way to terminate a stainless steel wire rope assembly. A wedge is pressed onto the end of the stainless steel wire rope 3 - 4 times the diameter of the stainless steel wire to stop the rope pulling through your post.
This is an exceptionally quick termination and easy to tension over small cable runs (2m - 3m lengths).
Ideally used on one side or stainless steel wire rope, the I-SYS® stainless steel end stop swaged is suited to most balustrade assemblies.
Available to suit stainless steel wire ropes from: 2mm ø - 8mm ø, the stainless steel end stop swaged offers great variety and flexibility.
Material: Stainless steel AISI 316 - kN = Breaking load.
Buy Assembly
| Choose a type: | |
| Specify quantity: | |
| Price | |||||
| Part number | ø rope | b | ød | kN | For Component |
| 865-0200 | 2 | 12 | 8 | 2 | £2.46 |
| 865-0300 | 3 | 15 | 8 | 4.5 | £3.00 |
| 865-0400 | 4 | 20 | 13 | 8.1 | £3.34 |
| 865-0500 | 5 | 20 | 13 | 12.6 | £3.77 |
| 865-0600 | 6 | 30 | 18 | 18.1 | £2.91 |
| 865-0800 | 8 | 40 | 18 | 23.2 | £4.24 |
Added to basket!